GLIMMER

In bioinformatics, GLIMMER (Gene Locator and Interpolated Markov ModelER) is used to find genes in prokaryotic DNA. "It is effective at finding genes in bacteria, archea, viruses, typically finding 98-99% of all relatively long protein coding genes". GLIMMER was the first system that used the interpolated Markov model to identify coding regions. The GLIMMER software is open source and is maintained by Steven Salzberg, Art Delcher, and their colleagues at the Center for Computational Biology at Johns Hopkins University. The original GLIMMER algorithms and software were designed by Art Delcher, Simon Kasif and Steven Salzberg and applied to bacterial genome annotation in collaboration with Owen White. == Versions == === GLIMMER 1.0 === First Version of GLIMMER "i.e., GLIMMER 1.0" was released in 1998 and it was published in the paper Microbial gene identification using interpolated Markov model. Markov models were used to identify microbial genes in GLIMMER 1.0. GLIMMER considers the local composition sequence dependencies which makes GLIMMER more flexible and more powerful when compared to fixed-order Markov model. There was a comparison made between interpolated Markov model used by GLIMMER and fifth order Markov model in the paper Microbial gene identification using interpolated Markov models. "GLIMMER algorithm found 1680 genes out of 1717 annotated genes in Haemophilus influenzae where fifth order Markov model found 1574 genes. GLIMMER found 209 additional genes which were not included in 1717 annotated genes where fifth order Markov model found 104 genes."' === GLIMMER 2.0 === Second Version of GLIMMER i.e., GLIMMER 2.0 was released in 1999 and it was published in the paper Improved microbial identification with GLIMMER. This paper provides significant technical improvements such as using interpolated context model instead of interpolated Markov model and resolving overlapping genes which improves the accuracy of GLIMMER. Interpolated context models are used instead of interpolated Markov model which gives the flexibility to select any base. In interpolated Markov model probability distribution of a base is determined from the immediate preceding bases. If the immediate preceding base is irrelevant amino acid translation, interpolated Markov model still considers the preceding base to determine the probability of given base where as interpolated context model which was used in GLIMMER 2.0 can ignore irrelevant bases. False positive predictions were increased in GLIMMER 2.0 to reduce the number of false negative predictions. Overlapped genes are also resolved in GLIMMER 2.0. Various comparisons between GLIMMER 1.0 and GLIMMER 2.0 were made in the paper Improved microbial identification with GLIMMER which shows improvement in the later version. "Sensitivity of GLIMMER 1.0 ranges from 98.4 to 99.7% with an average of 99.1% where as GLIMMER 2.0 has a sensitivity range from 98.6 to 99.8% with an average of 99.3%. GLIMMER 2.0 is very effective in finding genes of high density. The parasite Trypanosoma brucei, responsible for causing African sleeping sickness is being identified by GLIMMER 2.0" === GLIMMER 3.0 === Third version of GLIMMER, "GLIMMER 3.0" was released in 2007 and it was published in the paper Identifying bacterial genes and endosymbiont DNA with Glimmer. This paper describes several major changes made to the GLIMMER system including improved methods to identify coding regions and start codon. Scoring of ORF in GLIMMER 3.0 is done in reverse order i.e., starting from stop codon and moves back towards the start codon. Reverse scanning helps in identifying the coding portion of the gene more accurately which is contained in the context window of IMM. GLIMMER 3.0 also improves the generated training set data by comparing the long-ORF with universal amino acid distribution of widely disparate bacterial genomes."GLIMMER 3.0 has an average long-ORF output of 57% for various organisms where as GLIMMER 2.0 has an average long-ORF output of 39%." GLIMMER 3.0 reduces the rate of false positive predictions which were increased in GLIMMER 2.0 to reduce the number of false negative predictions. "GLIMMER 3.0 has a start-site prediction accuracy of 99.5% for 3'5' matches where as GLIMMER 2.0 has 99.1% for 3'5' matches. GLIMMER 3.0 uses a new algorithm for scanning coding regions, a new start site detection module, and architecture which integrates all gene predictions across an entire genome." Minimum description length === Theoretical and Biological Foundation === The GLIMMER project helped introduce and popularize the use of variable length models in Computational Biology and Bioinformatics that subsequently have been applied to numerous problems such as protein classification and others. Variable length modeling was originally pioneered by information theorists and subsequently ingeniously applied and popularized in data compression (e.g. Ziv-Lempel compression). Prediction and compression are intimately linked using Minimum Description Length Principles. The basic idea is to create a dictionary of frequent words (motifs in biological sequences). The intuition is that the frequently occurring motifs are likely to be most predictive and informative. In GLIMMER the interpolated model is a mixture model of the probabilities of these relatively common motifs. Similarly to the development of HMMs in Computational Biology, the authors of GLIMMER were conceptually influenced by the previous application of another variant of interpolated Markov models to speech recognition by researchers such as Fred Jelinek (IBM) and Eric Ristad (Princeton). The learning algorithm in GLIMMER is different from these earlier approaches. == Access == GLIMMER can be downloaded from The Glimmer home page (requires a C++ compiler). Alternatively, an online version is hosted by NCBI [1]. == How it works == GLIMMER primarily searches for long-ORFS. An open reading frame might overlap with any other open reading frame which will be resolved using the technique described in the sub section. Using these long-ORFS and following certain amino acid distribution GLIMMER generates training set data. Using these training data, GLIMMER trains all the six Markov models of coding DNA from zero to eight order and also train the model for noncoding DNA GLIMMER tries to calculate the probabilities from the data. Based on the number of observations, GLIMMER determines whether to use fixed order Markov model or interpolated Markov model. If the number of observations are greater than 400, GLIMMER uses fixed order Markov model to obtain there probabilities. If the number of observations are less than 400, GLIMMER uses interpolated Markov model which is briefly explained in the next sub section. GLIMMER obtains score for every long-ORF generated using all the six coding DNA models and also using non-coding DNA model. If the score obtained in the previous step is greater than a certain threshold then GLIMMER predicts it to be a gene. The steps explained above describes the basic functionality of GLIMMER. There are various improvements made to GLIMMER and some of them are described in the following sub-sections. === The GLIMMER system === GLIMMER system consists of two programs. First program called build-imm, which takes an input set of sequences and outputs the interpolated Markov model as follows. The probability for each base i.e., A,C,G,T for all k-mers for 0 ≤ k ≤ 8 is computed. Then, for each k-mer, GLIMMER computes weight. New sequence probability is computed as follows. where n is the length of the sequence S x {\displaystyle S_{x}} is the oligomer at position x. I M M 8 ( S x ) {\displaystyle IMM_{8}(S_{x})} , the 8 t h {\displaystyle 8^{th}} -order interpolated Markov model score is computed as "where Y k ( S x − 1 ) {\displaystyle Y_{k}(S_{x-1})} is the weight of the k-mer at position x-1 in the sequence S and P k ( S x ) {\displaystyle P_{k}(S_{x})} is the estimate obtained from the training data of the probability of the base located at position x in the k t h {\displaystyle k^{th}} -order model." The probability of base S x {\displaystyle S_{x}} given the i previous bases is computed as follows. "The value of Y i ( S x ) {\displaystyle Y_{i}(S_{x})} associated with P i ( S x ) {\displaystyle P_{i}(S_{x})} can be regarded as a measure of confidence in the accuracy of this value as an estimate of the true probability. GLIMMER uses two criteria to determine Y i ( S x ) {\displaystyle Y_{i}(S_{x})} . The first of these is simple frequency occurrence in which the number of occurrences of context string S x , i {\displaystyle S_{x,i}} in the training data exceeds a specific threshold value, then Y i ( S x ) {\displaystyle Y_{i}(S_{x})} is set to 1.0. The current default value for threshold is 400, which gives 95% confidence. When there are insufficient sample occurrences of a context string, build-imm employ additional criteria to determine Y {\displaystyle Y} value. For a

Attention (machine learning)

In machine learning, attention is a method that determines the importance of each component in a sequence relative to the other components in that sequence. In natural language processing, importance is represented by "soft" weights assigned to each word in a sentence. More generally, attention encodes vectors called token embeddings across a fixed-width sequence that can range from tens to millions of tokens in size. Unlike "hard" weights, which are computed during the backwards training pass, "soft" weights exist only in the forward pass and therefore change with every step of the input. Earlier designs implemented the attention mechanism in a serial recurrent neural network (RNN) language translation system, but a more recent design, namely the transformer, removed the slower sequential RNN and relied more heavily on the faster parallel attention scheme. Inspired by ideas about attention in humans, the attention mechanism was developed to address the weaknesses of using information from the hidden layers of recurrent neural networks. Recurrent neural networks favor information contained in words at the end of a sentence and thus deemed more recent, thereby tending to attenuate the significance and associated predictive weight assigned to information earlier in the sentence. Attention allows a token equal access to any part of a sentence directly, rather than only through the previous state. == History == Additional surveys of the attention mechanism in deep learning are provided by Niu et al. and Soydaner. The major breakthrough came with self-attention, where each element in the input sequence attends to all others, enabling the model to capture global dependencies. This idea was central to the Transformer architecture, which replaced recurrence with attention mechanisms. As a result, Transformers became the foundation for models like BERT, T5 and generative pre-trained transformers (GPT). == Overview == The modern era of machine attention was revitalized by grafting an attention mechanism (Fig 1. orange) to an Encoder-Decoder. Figure 2 shows the internal step-by-step operation of the attention block (A) in Fig 1. === Interpreting attention weights === In translating between languages, alignment is the process of matching words from the source sentence to words of the translated sentence. Networks that perform verbatim translation without regard to word order would show the highest scores along the (dominant) diagonal of the matrix. The off-diagonal dominance shows that the attention mechanism is more nuanced. Consider an example of translating I love you to French. On the first pass through the decoder, 94% of the attention weight is on the first English word I, so the network offers the word je. On the second pass of the decoder, 88% of the attention weight is on the third English word you, so it offers t'. On the last pass, 95% of the attention weight is on the second English word love, so it offers aime. In the I love you example, the second word love is aligned with the third word aime. Stacking soft row vectors together for je, t', and aime yields an alignment matrix: Sometimes, alignment can be multiple-to-multiple. For example, the English phrase look it up corresponds to cherchez-le. Thus, "soft" attention weights work better than "hard" attention weights (setting one attention weight to 1, and the others to 0), as we would like the model to make a context vector consisting of a weighted sum of the hidden vectors, rather than "the best one", as there may not be a best hidden vector. == Variants == Many variants of attention implement soft weights, such as fast weight programmers, or fast weight controllers (1992). A "slow" neural network outputs the "fast" weights of another neural network through outer products. The slow network learns by gradient descent. It was later renamed as "linearized self-attention". Bahdanau-style attention, also referred to as additive attention, Luong-style attention, which is known as multiplicative attention, Early attention mechanisms similar to modern self-attention were proposed using recurrent neural networks. However, the highly parallelizable self-attention was introduced in 2017 and successfully used in the Transformer model, positional attention and factorized positional attention. For convolutional neural networks, attention mechanisms can be distinguished by the dimension on which they operate, namely: spatial attention, channel attention, or combinations. These variants recombine the encoder-side inputs to redistribute those effects to each target output. Often, a correlation-style matrix of dot products provides the re-weighting coefficients. In the figures below, W is the matrix of context attention weights, similar to the formula in Overview section above. == Optimizations == === Flash attention === The size of the attention matrix is proportional to the square of the number of input tokens. Therefore, when the input is long, calculating the attention matrix requires a lot of GPU memory. Flash attention is an implementation that reduces the memory needs and increases efficiency without sacrificing accuracy. It achieves this by partitioning the attention computation into smaller blocks that fit into the GPU's faster on-chip memory, reducing the need to store large intermediate matrices and thus lowering memory usage while increasing computational efficiency. === FlexAttention === FlexAttention is an attention kernel developed by Meta that allows users to modify attention scores prior to softmax and dynamically chooses the optimal attention algorithm. == Applications == Attention is widely used in natural language processing, computer vision, and speech recognition. In NLP, it improves context understanding in tasks like question answering and summarization. In vision, visual attention helps models focus on relevant image regions, enhancing object detection and image captioning. === Attention maps as explanations for vision transformers === From the original paper on vision transformers (ViT), visualizing attention scores as a heat map (called saliency maps or attention maps) has become an important and routine way to inspect the decision making process of ViT models. One can compute the attention maps with respect to any attention head at any layer, while the deeper layers tend to show more semantically meaningful visualization. Attention rollout is a recursive algorithm to combine attention scores across all layers, by computing the dot product of successive attention maps. Because vision transformers are typically trained in a self-supervised manner, attention maps are generally not class-sensitive. When a classification head is attached to the ViT backbone, class-discriminative attention maps (CDAM) combines attention maps and gradients with respect to the class [CLS] token. Some class-sensitive interpretability methods originally developed for convolutional neural networks can be also applied to ViT, such as GradCAM, which back-propagates the gradients to the outputs of the final attention layer. Using attention as basis of explanation for the transformers in language and vision is not without debate. While some pioneering papers analyzed and framed attention scores as explanations, higher attention scores do not always correlate with greater impact on model performances. == Mathematical representation == === Standard scaled dot-product attention === For matrices: Q ∈ R m × d k , K ∈ R n × d k {\displaystyle Q\in \mathbb {R} ^{m\times d_{k}},K\in \mathbb {R} ^{n\times d_{k}}} and V ∈ R n × d v {\displaystyle V\in \mathbb {R} ^{n\times d_{v}}} , the scaled dot-product, or QKV attention, is defined as: Attention ( Q , K , V ) = softmax ( Q K T d k ) V ∈ R m × d v {\displaystyle {\text{Attention}}(Q,K,V)={\text{softmax}}\left({\frac {QK^{T}}{\sqrt {d_{k}}}}\right)V\in \mathbb {R} ^{m\times d_{v}}} where T {\displaystyle {}^{T}} denotes transpose and the softmax function is applied independently to every row of its argument. The matrix Q {\displaystyle Q} contains m {\displaystyle m} queries, while matrices K , V {\displaystyle K,V} jointly contain an unordered set of n {\displaystyle n} key-value pairs. Value vectors in matrix V {\displaystyle V} are weighted using the weights resulting from the softmax operation, so that the rows of the m {\displaystyle m} -by- d v {\displaystyle d_{v}} output matrix are confined to the convex hull of the points in R d v {\displaystyle \mathbb {R} ^{d_{v}}} given by the rows of V {\displaystyle V} . To understand the permutation invariance and permutation equivariance properties of QKV attention, let A ∈ R m × m {\displaystyle A\in \mathbb {R} ^{m\times m}} and B ∈ R n × n {\displaystyle B\in \mathbb {R} ^{n\times n}} be permutation matrices; and D ∈ R m × n {\displaystyle D\in \mathbb {R} ^{m\times n}} an arbitrary matrix. The softmax function is permutation equivariant in the sense that: softmax ( A D B ) = A softmax ( D ) B {\displays

Communications system

A communications system is a collection of individual telecommunications networks systems, relay stations, tributary stations, and terminal equipment usually capable of interconnection and interoperation to form an integrated whole. Communication systems allow the transfer of information from one place to another or from one device to another through a specified channel or medium. The components of a communications system serve a common purpose, are technically compatible, use common procedures, respond to controls, and operate in union. In the structure of a communication system, the transmitter first converts the data received from the source into a light signal and transmits it through the medium to the destination of the receiver. The receiver connected at the receiving end converts it to digital data, maintaining certain protocols e.g. FTP, ISP assigned protocols etc. Telecommunications is a method of communication (e.g., for sports broadcasting, mass media, journalism, etc.). Communication is the act of conveying intended meanings from one entity or group to another through the use of mutually understood signs and semiotic rules. == Types == === By media === An optical communication system is any form of communications system that uses light as the transmission medium. Equipment consists of a transmitter, which encodes a message into an optical signal, a communication channel, which carries the signal to its destination, and a receiver, which reproduces the message from the received optical signal. Fiber-optic communication systems transmit information from one place to another by sending light through an optical fiber. The light forms a carrier signal that is modulated to carry information. A radio communication system is composed of several communications subsystems that give exterior communications capabilities. A radio communication system comprises a transmitting conductor in which electrical oscillations or currents are produced and which is arranged to cause such currents or oscillations to be propagated through the free space medium from one point to another remote therefrom and a receiving conductor at such distant point adapted to be excited by the oscillations or currents propagated from the transmitter. Power-line communication systems operate by impressing a modulated carrier signal on power wires. Different types of power-line communications use different frequency bands, depending on the signal transmission characteristics of the power wiring used. Since the power wiring system was originally intended for transmission of AC power, the power wire circuits have only a limited ability to carry higher frequencies. The propagation problem is a limiting factor for each type of power line communications. === By technology === A duplex communication system is a system composed of two connected parties or devices which can communicate with one another in both directions. The term duplex is used when describing communication between two parties or devices. Duplex systems are employed in nearly all communications networks, either to allow for a communication "two-way street" between two connected parties or to provide a "reverse path" for the monitoring and remote adjustment of equipment in the field. An antenna is basically a small length of a conductor that is used to radiate or receive electromagnetic waves. It acts as a conversion device. At the transmitting end it converts high frequency current into electromagnetic waves. At the receiving end it transforms electromagnetic waves into electrical signals that is fed into the input of the receiver. several types of antenna are used in communication. Examples of communications subsystems include the Defense Communications System (DCS). === Examples: by technology === Telephone Mobile phone Tablet computer Television Telegraph Edison Telegraph TV cable Computer === By application area === The term transmission system is used in the telecommunications industry to emphasize the intermediate media, protocols, and equipment in the circuit, rather than particular end-user applications. A tactical communications system is a communications system that (a) is used within, or in direct support of tactical forces (b) is designed to meet the requirements of changing tactical situations and varying environmental conditions, (c) provides securable communications, such as voice, data, and video, among mobile users to facilitate command and control within, and in support of, tactical forces, and (d) usually requires extremely short installation times, usually on the order of hours, in order to meet the requirements of frequent relocation. An Emergency communication system is any system (typically computer based) that is organized for the primary purpose of supporting the two way communication of emergency messages between both individuals and groups of individuals. These systems are commonly designed to integrate the cross-communication of messages between are variety of communication technologies. An Automatic call distributor (ACD) is a communication system that automatically queues, assigns and connects callers to handlers. This is used often in customer service (such as for product or service complaints), ordering by telephone (such as in a ticket office), or coordination services (such as in air traffic control). A Voice Communication Control System (VCCS) is essentially an ACD with characteristics that make it more adapted to use in critical situations (no waiting for dial tone, or lengthy recorded announcements, radio and telephone lines equally easily connected to, individual lines immediately accessible etc..) == Key components == =

Power cycling

Power cycling is the act of turning a piece of equipment, usually a computer, off and then on again. Reasons for power cycling include having an electronic device reinitialize its set of configuration parameters or recover from an unresponsive state of its mission critical functionality, such as in a crash or hang situation. Power cycling can also be used to reset network activity inside a modem. It can also be among the first steps for troubleshooting an issue. == Overview == Power cycling can be done manually, usually using the power switch on the device, or remotely, through some type of external device connected to the power input. In the data center environment, remote control power cycling can usually be done through a power distribution unit, over the network. In the home environment, this can be done through home automation powerline communications. Most Internet service providers publish a "how-to" on their website showing their customers the correct procedure to power cycle their devices. Power cycling is a common diagnostic procedure usually performed first when a computer system freezes. However, frequently power cycling a computer can cause thermal stress. Reset has an equal effect on the software but may be less problematic for the hardware as power is not interrupted. == Historical uses == On all Apollo missions to the moon, the landing radar was required to acquire the surface before a landing could be attempted. But on Apollo 14, the landing radar was unable to lock on. Mission control told the astronauts to cycle the power. They did, the radar locked on just in time, and the landing was completed. During the Rosetta mission to comet 67P/Churyumov–Gerasimenko, the Philae lander did not return the expected telemetry on awakening after arrival at the comet. The problem was diagnosed as "somehow a glitch in the electronics", engineers cycled the power, and the lander awoke correctly. During the launch of the billion dollar AEHF-6 satellite on 26 March 2020 by an Atlas V rocket from Cape Canaveral Space Force Station in Florida, a hold was called at T-46 seconds due to hydraulic system not responding as expected. The launch crew turned it off and back on, and the launch proceeded normally. In 2023 the Interstellar Boundary Explorer spacecraft stopped responding to commands after an anomaly. When gentler techniques failed, NASA resorted to rebooting the spacecraft with the remote equivalent of a power cycle.

Content creation

Content creation is the act of making and sharing media content, particularly in digital contexts. A content creator is the person or studio behind such content. According to Dictionary.com, content refers to "something that is to be expressed through some medium, as speech, writing or any of various arts" for self-expression, distribution, marketing and/or publication. Content creation encompasses various activities, including maintaining and updating web sites, blogging, article writing, photography, videography, online commentary, social media accounts, and editing and distribution of digital media. In a survey conducted by the Pew Research Center, the content thus created was defined as "the material people contribute to the online world". In addition to traditional forms of content creation, digital platforms face growing challenges related to privacy, copyright, misinformation, platform moderation policies, and the repercussions of violating community guidelines. == Content creators == Content creation is the process of producing and sharing various forms of content such as text, images, audio, and video, designed to engage and inform a specific audience. It plays a crucial role in digital marketing, branding, and online communication and brand awareness. Content can be created for a range of platforms, including social media, websites, blogs, and multimedia channels. Whether it's through written articles, compelling photography, or engaging videos, content creation helps businesses build a connection with their audience, increase visibility, and drive traffic. The process typically involves identifying the target audience, brainstorming ideas, creating the content, and distributing it across various channels. Successful content creation combines creativity with strategic planning, considering audience preferences, trends, and platform characteristics to achieve marketing and branding goals. === News organizations === News organizations, especially those with a large and global reach like The New York Times, NPR, and CNN, consistently create some of the most shared content on the Web, especially in relation to current events. In the words of a 2011 report from the Oxford School for the Study of Journalism and the Reuters Institute for the Study of Journalism, "Mainstream media is the lifeblood of topical social media conversations in the UK." While the rise of digital media has disrupted traditional news outlets, many have adapted and have begun to produce content that is designed to function on the web and be shared on social media. The social media site Twitter is a major distributor and aggregator of breaking news from various sources, and the function and value of Twitter in the distribution of news is a frequent topic of discussion and research in journalism. User-generated content, social media blogging and citizen journalism have changed the nature of news content in recent years. The company Narrative Science is now using artificial intelligence to produce news articles and interpret data. === Colleges, universities, and think tanks === Academic institutions, such as colleges and universities, create content in the form of books, journal articles, white papers, and some forms of digital scholarship, such as blogs that are group edited by academics, class wikis, or video lectures that support a massive open online course (MOOC). Through an open data initiative, institutions may make raw data supporting their experiments or conclusions available on the Web. Academic content may be gathered and made accessible to other academics or the public through publications, databases, libraries, and digital libraries. Academic content may be closed source or open access (OA). Closed-source content is only available to authorized users or subscribers. For example, an important journal or a scholarly database may be a closed source, available only to students and faculty through the institution's library. Open-access articles are open to the public, with the publication and distribution costs shouldered by the institution publishing the content. === Companies === Corporate content includes advertising and public relations content, as well as other types of content produced for profit, including white papers and sponsored research. Advertising can also include auto-generated content, with blocks of content generated by programs or bots for search engine optimization. Companies also create annual reports which are part of their company's workings and a detailed review of their financial year. This gives the stakeholders of the company insight into the company's current and future prospects and direction. === Artists and writers === Cultural works, like music, movies, literature, and art, are also major forms of content. Examples include traditionally published books and e-books as well as self-published books, digital art, fanfiction, and fan art. Independent artists, including authors and musicians, have found commercial success by making their work available on the Internet. === Government === Through digitization, sunshine laws, open records laws and data collection, governments may make statistical, legal or regulatory information available on the Internet. National libraries and state archives turn historical documents, public records, and unique relics into online databases and exhibits. This has raised significant privacy issues. In 2012, The Journal News, a New York state paper, sparked an outcry when it published an interactive map of the state's gun owner locations using legally obtained public records. Governments also create online or digital propaganda or misinformation to support domestic and international goals. This can include astroturfing, or using media to create a false impression of mainstream belief or opinion. Governments can also use open content, such as public records and open data, in service of public health, educational and scientific goals, such as crowdsourcing solutions to complex policy problems. In 2013, the National Aeronautics and Space Administration (NASA) joined the asteroid mining company Planetary Resources to crowdsource the hunt for near-Earth objects. Describing NASA's crowdsourcing work in an interview, technology transfer executive David Locke spoke of the "untapped cognitive surplus that exists in the world" which could be used to help develop NASA technology. In addition to making governments more participatory, open records and open data have the potential to make governments more transparent and less corrupt. === Users === The introduction of Web 2.0 made it possible for content consumers to be more involved in the generation and sharing of content. With the advent of digital media, the amount of user generated content, as well as the age and class range of users, has increased. 8% of Internet users are very active in content creation and consumption. Worldwide, about one in four Internet users are significant content creators, and users in emerging markets lead the world in engagement. Research has also found that young adults of a higher socioeconomic background tend to create more content than those from lower socioeconomic backgrounds. 69% of American and European internet users are "spectators", who consume—but do not create—online and digital media. The ratio of content creators to the amount of content they generate is sometimes referred to as the 1% rule, a rule of thumb that suggests that only 1% of a forum's users create nearly all of its content. Motivations for creating new content may include the desire to gain new knowledge, the possibility of publicity, or simple altruism. Users may also create new content in order to bring about social reforms. However, researchers caution that in order to be effective, context must be considered, a diverse array of people must be included, and all users must participate throughout the process. According to a 2011 study, minorities create content in order to connect with their communities online. African-American users have been found to create content as a means of self-expression that was not previously available. Media portrayals of minorities are sometimes inaccurate and stereotypical which affects the general perception of these minorities. African-Americans respond to their portrayals digitally through the use of social media such as Twitter and Tumblr. The creation of Black Twitter has allowed a community to share their problems and ideas. ==== Teens ==== Younger users now have greater access to content, content creating applications, and the ability to publish to different types of media, such as Facebook, Blogger, Instagram, DeviantArt, or Tumblr. As of 2005, around 21 million teens used the internet and 57%, or 12 million teens, consider themselves content creators. This proportion of media creation and sharing is higher than that of adults. With the advent of the Internet, teens have had more access to tools for sharing an

Wetware (brain)

Wetware is a term drawn from the computer-related idea of hardware or software, but applied to biological life forms. == Usage == The prefix "wet" is a reference to the water found in living creatures. Wetware is used to describe the elements equivalent to hardware and software found in a person, especially the central nervous system (CNS) and the human mind. The term wetware finds use in works of fiction, in scholarly publications and in popularizations. The "hardware" component of wetware concerns the bioelectric and biochemical properties of the CNS, specifically the brain. If the sequence of impulses traveling across the various neurons are thought of symbolically as software, then the physical neurons would be the hardware. The amalgamated interaction of this software and hardware is manifested through continuously changing physical connections, and chemical and electrical influences that spread across the body. The process by which the mind and brain interact to produce the collection of experiences that we define as self-awareness is in question. == History == Although the exact definition has shifted over time, the term Wetware and its fundamental reference to "the physical mind" has been around at least since the mid-1950s. Mostly used in relatively obscure articles and papers, it was not until the heyday of cyberpunk, however, that the term found broad adoption. Among the first uses of the term in popular culture was the Bruce Sterling novel Schismatrix (1985) and the Michael Swanwick novel Vacuum Flowers (1987). Rudy Rucker references the term in a number of books, including one entitled Wetware (1988): ... all sparks and tastes and tangles, all its stimulus/response patterns – the whole bio-cybernetic software of mind. Rucker did not use the word to simply mean a brain, nor in the human-resources sense of employees. He used wetware to stand for the data found in any biological system, analogous perhaps to the firmware that is found in a ROM chip. In Rucker's sense, a seed, a plant graft, an embryo, or a biological virus are all wetware. DNA, the immune system, and the evolved neural architecture of the brain are further examples of wetware in this sense. Rucker describes his conception in a 1992 compendium The Mondo 2000 User's Guide to the New Edge, which he quotes in a 2007 blog entry. Early cyber-guru Arthur Kroker used the term in his blog. With the term getting traction in trendsetting publications, it became a buzzword in the early 1990s. In 1991, Dutch media theorist Geert Lovink organized the Wetware Convention in Amsterdam, which was supposed to be an antidote to the "out-of-body" experiments conducted in high-tech laboratories, such as experiments in virtual reality. Timothy Leary, in an appendix to Info-Psychology originally written in 1975–76 and published in 1989, used the term wetware, writing that "psychedelic neuro-transmitters were the hot new technology for booting-up the 'wetware' of the brain". Another common reference is: "Wetware has 7 plus or minus 2 temporary registers." The numerical allusion is to a classic 1957 article by George A. Miller, The magical number 7 plus or minus two: some limits in our capacity for processing information, which later gave way to Miller's law.

Creepy treehouse

Creepy treehouse is a social media term, or internet slang, referring to websites or technologies that are used for educational purposes but regarded by students as an invasion of privacy. == History == The term was first described in 2008 by Utah Valley University instructional-design services director Jared Stein as "institutionally controlled technology/tool that emulates or mimics pre-existing [sic] technologies or tools that may already be in use by the learners, or by learners' peer groups." This was when social media such as Facebook was starting to become mainstream and professors would try and get students to interact with them on the site for educational purposes. Some professors would require their students to use Facebook or Twitter as part of class assignments. == Usage == The term was first described as "technological innovations by faculty members that make students’ skin crawl." The term also refers to online accounts and websites that users tend to avoid, especially young people who avoid visiting the pages of educators and other adults. Author Martin Weller defines creepy treehouse as a digital space where authority figures are viewed as invading younger people's privacy. One such example is a professor giving his students an option to use a popular video game to learn about history instead of writing an essay. Students in that class chose to write the essay instead as the method was previously unmentioned and it was not an unnatural method of interaction. Another example given was Blackboard Sync, a feature that was used to connect the school website Blackboard with students' Facebook accounts. == Solutions == University of Regina professor Alec Couros suggests that instead of "forcing" student participation with their own digital platforms, professors should use methods like online forums. Jason Jones of chronicle.com suggested letting students create social media groups for the class themselves and explaining why using technologies is required and important.